Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
FP100
FOOD PROCESSOR
701 S Ridge Avenue, Troy, OH 45374
MODELS
STANDARD FEATURES
■ Red OFF, Green ON Button
■ Compact Design
❑ FP100 Continuous Feed Half Hopper
Food Processor
Specifications, Details and Dimensions on Inside and Back.
■ Angled Front
■ Planetary Drive
■ Large Half Size Feed Hopper
■ All Aluminum Hopper and Housing
■ Interlock Switch
■ Plate Speed of 420 RPMs
OPTIONS
❑ Maximum Security Correctional Package
ACCESSORIES
❑ 3-Pack Plates: 1⁄16, 5⁄32 slicer plates, 3⁄16 shredder
plate, 1 wall rack
❑ 6-Pack Plates: 1⁄16, 5⁄32, 3⁄8, 7⁄32 slicer plates,
3⁄16 shredder plate and 3⁄8 dicer plate, 2 wall racks
❑ 3-Peg Wall Rack: designed to hold three plates
for additional plate storage
❑ Slicer Plates: 1⁄16, 5⁄32, 7⁄32, 3⁄8, 5⁄8* and 3⁄8 HD, 1⁄2
;
3⁄16 crimping plate; soft dice 5⁄16, 3⁄8, 1⁄2, 5⁄8
❑ Julienne Plates: 3⁄32, 3⁄16, 5⁄16
❑ Dicer Grids: 9⁄32, 3⁄8, 1⁄2, 5⁄8, 3⁄4*; soft dice 5⁄16, 3⁄8, 1⁄2, 5⁄8
*NOTE: When you use 5⁄8 slicing plate for
dicing, only a DICE-3/4 or 15DICE-5/8L
dicer plate can be used.
❑ Shredder Plates: 1⁄16, 3⁄32, 1⁄8, 3⁄16, 5⁄16, 7⁄32
❑ Grater Plate: Fine, Extra Fine
❑ Machine Table: Adjustable height to hold Food
Processor
❑ Adjustable height stainless steel lug cart
❑ Stainless steel receiving pan
❑ Plastic receiving pan
F-7759 – FP100 Food Processor
Page 1 of 4
FP100
FOOD PROCESSOR
701 S Ridge Avenue, Troy, OH 45374
SPECIFICATIONS
STANDARD EQUIPMENT: Basic unit with deflector
plate and cleaning brush.
DESIGN: Compact, conveniently designed at
50° angle for operator convenience. Small base
occupies minimal counter space. Carrying handle on
back of housing designed for ease of moving unit.
Housing constructed of anodized aluminum with
rubber feet on base to prevent movement or
skidding. Removable feed hopper is burnished
aluminum. Feed hopper, pusher and deflector plate
of acetal thermoplastic.
WARRANTY: Unit has full one-year warranty on
parts, labor and mileage against manufacturer’s
defects. Service contracts are available.
CUTTING TOOLS: Slicer, julienne and dicer plates
feature cast aluminum plates with cutlery-grade
stainless steel knives. Shredder and grater plates
feature stainless steel cutting plates with acetal
thermoplastic support hubs.
ELECTRICAL: 120/60/1, 3 Conductor power cord
(18 AWG) is 6 feet in length.
WEIGHT: Net - 39 lbs. Approximate Shipping -
46 lbs.
MOTOR: 3.5 amps. Planetary gear driven operating
at 420 RPM output. 1⁄3 H.P. with overload protection.
SWITCHES: Easy to operate (red) OFF and (green)
ON switch. Pusher plate and feed hopper interlocks.
F-7759 – FP100 Food Processor
Page 3 of 4
FP100
FOOD PROCESSOR
701 S Ridge Avenue, Troy, OH 45374
DETAILS AND DIMENSIONS
FP100
Hopper Maximum Width 63⁄8
"
"
Maximum Slice Size
Usable Depth
Feed Tube Diameter
21⁄2
6"
21⁄8
"
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Page 4 of 4
F-7759 (REv. 03/10)
F-7759 – FP100 Food Processor
LITHO IN U.S.A. (H-01)
|